HuntingNet.com Forums - View Single Post - Magnesium use in rifles?
View Single Post
Old 01-31-2012, 03:13 PM
  #4  
Centaur 1
Nontypical Buck
 
Centaur 1's Avatar
 
Join Date: Nov 2007
Location: Titusville Florida
Posts: 1,727
Default

CarpetBaggerDan, I learned the hard way that magnesium and water don't mix. I had quite a bit of magnesium to cut on the band saw. I started by fully cleaning the saw before I did any cutting, then when I was done I recleaned the saw to get rid of any magnesium chips. Since I was cleaning up, I decided to clean the horizontal bandsaw also. Anyone who's ever used one knows that there is a coolant system on these saws, and the chips are wet. Long story short, I used a shop-vac to clean both saws then I put the saw away. It was a couple of hours later when someone else used the vaccuum. Luckily he wasn't hurt because when he flipped the on switch, the latches that hold the top to the canister let go and the motor hit the ceiling. Lesson learned, magnesium and water don't mix.
Centaur 1 is offline