HuntingNet.com Forums - View Single Post - Scoped the Wolf again
View Single Post
Old 01-28-2012 | 09:07 PM
  #2  
MountainDevil54
Banned
 
Joined: Dec 2008
Posts: 9,186
Likes: 0
From: Boncarbo,Colorado
Default

Heres the Wolf with the new medium durasight mount and of course the bushnell that i remounted on it. ZERO trouble with this scope as you will see.


Now for the first target you will see 4 low shots, those were me getting it dialed in at 160 yards with 100gr BH209, 300gr Aerolites. I started off hitting pretty far over to the right and so i took 2 shots just to make sure and then adjusted over. Took 2 more shots and then moved the scope up to where the final 3 shots by the bulls eye are.

The Accuracy killer today for this Wolf were shots #3. My first 2 would just leave me smiling and giggling like a school girl and then screaming like a wife after shot #3 which always go high.


Again, I shot both the 250 and 300gr Aerolites.

Far right, 3 shots with the 250gr Powerbelt Aerolites, they impact a good deal to the right.

Close to the bulls eye again are 2 shots touching and then my 3rd high shot..

The shot directly above the bulls eye was me zeroing in the scope to get it as close to perfect as I could get.


This Wolf is a shooting mother! But on every darn group, shot #3 just would sling high a bit. I gave the rifle a few minutes between shots to cool down, cleaned the flash channel after each shot. I don't know if its just me pulling the trigger a bit hard or the fact that I am not using my lead sled. Either way, I am happy, just would like to get them all to touch one way or another.

The bulls eye in the last target is 1" DIA.
MountainDevil54 is offline  
Reply