Good news and bad news.

First off, thanks for everyones help on trying to help a newbie with reloading. With everyones help, I think I have my FL resizing die working properly. I simply adjusted my FL sizing die " in" a little more. Lee' s instructions told me turn the die between a 1/4 and a 1/2 turn, neither of these worked for me. I took someones advice and simply turned it furter in (5/8 turn past the shellholder). I tried it on some of my problem cases, and those now chamber smoothly in my gun. I am gratefuly for everyones help, again. That was the good news.

The bad news is, I found out first hand what happens when you don' t use enough lube. I knew I should have lubed that case! I now have a stuck case in my resizing die. (I will chalk this one up to inexperience/stubborn headedness). Won' t do that again. I tried to remove it first w/ pliers, then I drilled the primer pocket out and still nothing. Does anyone have any tips on getting a stuck case out?

I can' t wait to get past all the problems and stupid mistakes, so I can actually start enjoying reloading. Does anyone know the warrenty on LEE dies? If not, does anyone have any old .270 dies that anyone is willing to part with at a decent price?

LAHUNTER