I have a LRH 50 cal first I pillerd bouth screws then bedded full length of stock and at the end of stock and the barrel let the filler go into the fluting of the barrel about 2" long this locks the barrel down and will not move and makes the barrel think it shorter if you are a 1000 yd shooter you no what this mines im one to to remove barrel lift from the bolt end and it wiil come wright up lift from other end and you can not pull apart
the vents in the stock will cool the bottom of the barrel and stop lifting of the barrel when hot but give cool down time and the stock you have will not move in changing wether this will give you a sold shooting frim for shooting big loads and stay that way
then get the lehigh breech plug and shot black horn 209 powder and harvester sabots for mag loads hope this helps you may want to use sub bases to help presser some
Last edited by a1smokepole; 05-11-2011 at 02:10 PM.