Michael396
You can PM Cayugad and ask him for his insrtuctions for using JB's - he would gladly share them.
It is pretty much impossible to hurt anything with JB's Non-Embedding bore paste...
Here is what i do...
When you ran your JB paste in your bore - did you just oil a patch and coat with paste and run it with your jag?
Yes, you might have to double your patch to get a tight fit. But I ran an oiled patch with JB's smeared on the sides...ran that side 25 strokes top to bottom (important) then flip the patch over and run another 25 strokes. Did this 4 times then clean up the bore and see what you might have accomplished... On my Triumph I think I ran this operation twice.
Hope this helps
mike