HuntingNet.com Forums - View Single Post - An Interesting Post from Western Powders
Thread: An Interesting Post from Western Powders
View Single Post
Old 12-09-2010 | 05:38 PM
  #54  
MountainDevil54
Banned
 
Joined: Dec 2008
Posts: 9,186
Likes: 0
From: Boncarbo,Colorado
Default
Originally Posted by sabotloader
MountainDevil54



Is that with your firing pin bushing screwed all the way in?

And when you close it you are getting a snug fit against the primer???

You are out of CCI-209m's correct? I wonder what that might measure?

I also have to admit i can not figure out why when you drilled it out it stopped shooting unless you lost a seal at the primer or in the bore. Really and honestly that should have helped you...
Oh no im sorry, i removed my plug from the barrel and measured it like that with the primer installed. Im not sure how i'd do it any other way.

I dont have any cci 209m's our local store is out and hardly any of the big stores stock them.

With all the blow back,i lost a LOT of seal somewhere in the process.

I'll take the gun apart and see if that bushing is screwed in all of the way or not, it looks to be but i will double check.
MountainDevil54 is offline  
Reply
0