Originally Posted by
hunt12ga
In the past I have used the tubes that come with the blister packs of T7 pellets. I cut them to length to fit a primer, my bullet/sabot, and two pellets. I put a small piece of tape over it just in case. I also used these for holding premeasured loose powder loads when hunting with my little .32.
rw
I do the exact same as you do. Back when I used to buy the Pellets in the Plastic tubes I saved em all. But after I have them filled with bullet/sabot and powder I take a small piece of Masking Tape and seal the end so the cap does'nt fall off. I also have 2 Primers in each one just in case I drop one in a Hurry to reload.
Plus I always have one in my top shirt pocket for fast removal.
(BP)