02 mighty mite...lots of shots through it, but still...

After doing a techno hunt the other day I noticed some severe cable wear (so much so I didn' t finish) in a single spot that looked like a cut.

Scour the cam looking for a burr, wax buildup with sand in it, a bend on the lip, misalignment from the module and cam surfaces...nothing.

Have one of the " tecs" take a look ...nothing. He replaces the cable and we' re good. After a minute or so I realize my godforsaken string leeches have been launched 3/4 of the way out again and I' m over it now. 3rd time in 2 weeks the ends get blown off or they just sail away into the sky.

Hello whiskers...serve ' em in. The first guy I was dealing with is gone...the owner(who does indeed know his stuff) says he' ll hook me up. Has me shoot and arrow or two and says " your draw stop is screwed up, come back here" .

He puts in on the scale and pulls. " See where the cam rolls over? Your way to far beyond that point...we need to shorten it up."

??? Why? I thought the beauty of the infinty was the adjustbility of the stop to change length, letoff (and valley for sure!).

He says if you have it set too far past the roll it' ll eat your cable at the pivot..right about here (pointing to where my cables was 4 strands shy 20 minutes ago)

He didn' t know I just had that problem fixed (he was upstairs). But he adjusts it and I put a loop on to make up the difference.

Shooting rockets again after 10-15 minutes but what the hell was that about the drawstop??