And I've shot some 20-30yds and it seems to penetrate good but wont pass threw; I shoot a Bowtech General, Beman ICS Camhunt 500 (9.1 GPI), and I belive my draw length is 27 (my arms have grown another good 1/2in or so but I want to use my arrows i have now up because they will be too short if i extend my draw length, i still have almost a dozen and i still can shoot my bow comfortable), I shot 63lb draw and rage 3 blades.
#1. Your arrows are underspined so you probably aren't getting the best arrow flight possible. You should be shooting a 400 spined arrow. Give or sell the remaining arrows that you have and get the proper arrow.
#2. Rage broadheads are not known to be a good penetrating heads any way. They require a lot of energy to push those long blades through a deer. Shoot a moderate diameter fixed blade head like a Slick Trick standard, G5 montec, Magnus stinger, etc... and you will gt better penetration.
#3. Make sure that your bow is tuned as good as you can get it. If the arrow is not flying perfectly straight it is wasting energy correcting itself during flight and when it hits the animal it is wasting more energy as it is slapping side to side as it is penetrating the hole in the hide and bones on the entry side of the animal. This correlates to tip #1 above.