Close, Josh. You don' t want to go from one extreme to the other, ie. bottomed out to as low as it will go.

If I wanted to raise my draw weight and HOPED to use the same arrows, I' d go back to where the arrows were shooting good and start raising the draw weight in increments. 1 turn on each bolt, fire for effect. When the arrows started shooting squirrely, I' d back off a half turn and fire for effect.

The problem with doing that is it will definitely put you right at the raw edge of the arrow' s spine. It will work with field points. Maybe with mechs. But with fixed broadheads, you' ll probably have to work back down in draw weight to get them to fly.