Took them both out to 50 yards just to dial in with IMR White Hots and T7 magnum pellets.

Accura - 245gr Powerbelts
After 5 shots with 100gr IMR White Hots, cci 209 primers, the 6th shot was tight to get down the bore.
#1 shot on clean bore is high,


After cleaning and switching to the T7 Magnum pellets, cci 209 primers, Shot #4 was stiff to load.
#1 shot on clean bore is high again,


The ultra bore coat obviously helps greatly with both powders. Normally with T7 i had to use a range rod and really put some muscle into it on a fouled bore.
--------------------------------------------------------

Wolf,

100gr IMR White Hots, cci primer, 245gr Powerbelts,
Not happy with this group!


Switched over to the 295's after i cleaned the bore out and shot 4 more shots,
#1 shot was high, some where in the hole is 4 shots LOL. What a difference a bullet weight change makes!


After the 3 shots with the White Hots and 295's i had a bunch of premeasured 80gr 3f American Pioneer Powder. I figured what the heck!

Obviously you can see where one of the holes was covered with a black dot sticky to cover up an old shot from earlier. I am happy as heck with the 3 shot group with APP 3f.


Not a bad day for testing. The barrels were NEVER allowed to cool down between shots! Load up and shoot and those barrels were HOT to the touch!