So i bought a fuse piolot m series 5 pin sight the other day for my new axe 7. i went down to one of the local bow shops and stuck the sight on and began sighting in my first pin in the small indoor range they have in the back of the store. its about 15 yards inside. So im back there shootin with the guys that work there and i get my pin sighted in and me and one of them go outside to shoot. he starts shooting from 45 yards at these 3 foot tall hanging bag targets they got and ask me if i wanna shoot. i was like man i dont know where these pins are gone hit. he was like just shoot the 4th pin and aim at the bottom dot on the target and it should hit close. so i shoot my 4th pin from 45 yards and my arrows goes flying to the top of the tree line. he couldnt believe it was my 4th pin i shot but it was. so i move up to 30yards and shoot my second pin. i aim at the bottom dot on the target and it hits the top of the target about an inch from the top. so i step back to 40 yards shoot again an its hittin about 4 inches from the top of the target and im still shooting at the bottom dot. so i keep stepping back and shooting my second pin until i get to 60 yards and at this point my arrows are hittin about 5 inchces above the bottom dot on the target which ive been aiming at this whole time. the dude that im shooting with is just completely stunned (and me to) that my first pin is set at 15yds and my second pin is hitting at 65yds!!! i never moved my second pin from how the 5 pins were all evenly placed out of the box. my bow is shooting at 315 fps which is decent but not blazing fast. so what do yall think about this? the guy i was shooting with thinks there is something wrong. has anybody had this happen to them?