I don' t reccomend trying to use Easton Super nocks/3D supernocks or Bohning Signature nocks in a standard CX shaft: they can crack the back end of the shaft trying to get them in, and if not then will crack more easily over time. Personally I like the CE slimline nocks better than the Easton or Bohning (nock to serving fit is too tight), but if you are having problems the only good option is a ACC 3-60 unibushing or the Easton Redline 410/360 unibushing in combo w/ easton G nocks (.098 diameter..which is what most shops will carry)

But using Terminators you should be able to get away with a Super Nock since the shaft walls are much thicker than a standard CX. I put some in a handful of Term Selects I am sending Arthur P, and they seemed to work fine (arrows going out today Arthur, if you are reading this)

For goldtips I use the Goldtip G-nock bushing and g-nocks. Goldtip Lock Nocks are the worst design on the market.