Arrows are too stiff?
I was having trouble getting my BH and FP to hit well.
So I thought I would double check everything and for the first time check my spine. So I took apart the bow and was going back to step A. I put on my rest and loop. Shot the bow to get the 20yrd pin close to 20. I then shot two fletched arrows and two bare shaft arrows. The groups of each were about 1.5" at 20 yards. But the bare shafts were about 8" to the left of the fletched group. I repeated and got the same results! New to bare shaft tuning I read up on it and tried to use a 125gr head, but had the same results with the shafts hitting approx 6" to the left!
Parker Extreme Hunter mag.# 67 or 68, DL at 30" and arrows cut to 30". Carbon express terminator lite 60/75 arrows. 100gr tip and also tried the 125gr tip.
When I had purchased the arrows a while back some said I could be boderline underspine? Is there anything I can do besides by a new dozen arrows?
Last edited by JNTURK; 03-07-2010 at 04:59 PM.