Ok let’s glue up a limb.

Apply some epoxy to all adjoining surfaces.
First the glass then the Mesquite.



Flip the Mesquite over onto the glass apply epoxy to the dry side of the Mesquite and Bamboo.



Flip the bamboo onto the Mesquite
Apply more epoxy to the dry side of the bamboo and wedge the place the wedge onto the bamboo.



Next comes the Black Walnut and yes you guessed it even more epoxy.



Now comes the glass of course after you have applied the epoxy to the dry surfaces



Now comes the fun part, Transfer the limb stack to the form and add the pressure strip.



Secure the stack to the form.



Add the air hose.



Last but not least the top of the form and secure it.