HuntingNet.com Forums - View Single Post - Old model 99's
Thread: Old model 99's
View Single Post
Old 12-18-2009 | 03:13 PM
  #9  
Lonehunter61
Spike
 
Joined: May 2008
Posts: 43
Likes: 0
From: South Central Pa
Default

Ive used this load and has work well in our guns it has taken several whitetails with one shot out to 275 yds meas by laser range finder. I had taken load data from a manual for this cartridge 38.5 gr of IMR 3031 , Hornady 150grain pointed soft point flat base and CCI large rifle primer, I trim to the proper lenght and debur and chamfer the case mouth and clean the primer pockets. When seating the bullet I do not crimp these bullets . This is a handy rifle and cartridge.>> Please load with care start out at like 35 grains and work up to the load as long as you dont seea pressure problems if you dont know what this means do some reading . >> Users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any data
Lonehunter61 is offline  
Reply