Guy's I dont have a problem with the T7 Primer as fit with the firing pin, everything works well, no need to adjust the fit by backing off the firing pin. I guess the problem with the loose fitting T7's wont be a problem as long as I make sure it does'nt fall out as Im closing the action. I think CVA should have the stainless wire on the breechplugs like on my older CVA's, they fit snug no matter what size primer you use, but some you do need the capper extractor to remove it after firing. I guess the stainless steel wire on the older BP's of CVA's has it's advantages and disadvantages, the only disadvantage would be if you needed a quick seconf shot and did'nt have the extractor toll handy you'd never be able to get the spent primer out fast or with just your finger. But I am getting blowback with the bigger than average hole in the BP for the primers now used in the ACCURA.
(BP)