Breechplug
but I just put it on the threads of the BP, above you say you also put it on the (face) of the BP. Do you put it on the face of the BP and leave just enough so it does'nt cover the falsh hole?
It really doesn't matter if you cover the hole or not. The first primer you pop before loading will clear the flash hole.
Here is a wrapped Knight breech plug....
T7 primers are naturally dirty - matbe one of the most dirty primers - but I like the way they work with T7 so I will continue to use them. + they are not so hot that the will cause pre-mature gas cutting on the breech plug.
My problem may be with my T7 Primers in My ACCURA, when I open the action to remover the primer at the end of a Hunt, the primer just falls out into my hand, they fit loose, are they too loose?
Doesn't your breech plug have a spring that wraps around the BP. The spring has an end that protrudes into the nipple and should hold you primer in place. It should not fall out just because you open the gun - unless they copied TC Encore extractor also...