I have a leupold Ultimate Slam ML Scope on one of My ACCURA's. So far I put about 120 shots through the Ml and scope and have had no problems with the scope. Im getting 1" 5 shot groups at 100yds using it.
But had I known (should have known better, because I did know) that the scope is set up for a 250gr Bullet using 150gr's of powder and have the scope set on 9 Power to get the scope to work as it's suppos-to. If you dont use this load you'll have to guess as to where to hold using the SABR reticle, and that defeats the pourpose of using the scope, or buying one. For me Im using 105 gr's of Pyrodox RS with a 240gr XTP Mag, so I had to sight in with that load. Then for the marks on the SABR I did this for the scope to work for my load.....I used the circle cross for 100yds, then I seen where my load would hit for the bottom of the circle and noted where I hit. Then for the first black circle I shot to see where I'd hit using that and noted it, and I did the same for the bottom black circle. So my marks are sort of custom settings using the SABR Reticle as I did not use the recommended load. The scope is not for everyone unless you use 150grs of powder and a 250gr Bullet. And their recommended load is way too much powder for your best accuracy and recoli. That's why me using 105grs had to sight in the way I did to be able to use the scope. Why shoot 150grs of powder and have your bullets going all over with no consistant group and having this nice scope makes no sence. Would I buy this scope again, no, I'd buy a regular (non ballistics aiming scope) and sight in 2" high at 50yds and go Hunting, much easier. Also uless you really need to shoot out past 125-150yds, and your using 150gr's of powder and a 250gr bullet then you dont need this scope.
Is it a well built clear scope, yes, is it for everyone, no. Sorry Leupold, nice scope but not user friendly.
(BP)