Originally Posted by
Snipe4Food
Was wondering what exactly cam lean is and how it affects your bow. Ive encountered an issue where my bottom cam seems to fray my string where the string rolls into the cam. Its almost as if its not rolling straight into the cam but is kinda rubbing on the edge of the groove as it goes in. Is this cam lean? What should i do about this?
Cam lean would cause that. But so would a bad serving job or busted serving. You only have to bust one strand of the serving for it to do what your seeing. But you are correct, cam lean can too.
Basically if your cam leans one way or another thru out the draw cycle, its leaning. Can be caused by improperly installed strings/cables, bad limbs, inconsistently limbs, riser warp, limb pockets, axles, you name it. But it most likely is simply you need to adjust the split bus cable depending ont the bow.
To check for, you can eye ball it, use a level, or use a spott hogg laser tool. Which I love.