HuntingNet.com Forums - View Single Post - Help...T/C Breakage
View Single Post
Old 10-10-2009 | 05:58 PM
  #17  
sabotloader's Avatar
sabotloader
Boone & Crockett
 
Joined: Aug 2004
Posts: 11,703
Likes: 0
From: Idaho
Default

mitchmtm1

Yep that was me out thinking myself. I was thinking that in a short of barrel the faster powder would give me better velocity. Stupid bp rookie.
The thought is/was correct... and if you reduce your projectile to 240/250 grains or even 200 - it might serve you really well.

Everything looks like new on the rifle (except the nipple now) and the spring is in perfect condition.
Very Good!

I can not remember what that nipple really looks like... I know the #11 and Musket Nipple for the BD were both what TC calls a flame thrower nipple, but I do not remember if the 209 has a long instert...

The nipple is/should be OK you just have to replace the retainer spring - correct?

I have extra CVA springs that might work, but you should be able to get some from TC...

Do you have a replacement spring?

I did a little edit work on your picture and as I look at it - the nipple is OK but the spring needs to be replaced.

mike
Attached Images  

Last edited by sabotloader; 10-10-2009 at 06:06 PM.
sabotloader is offline  
Reply