Installed the Bushnell Trophy 3-9x40 on the Accura today and sighted in with 90gr pyrodex RS and the 250gr Harvester Sabertooth bullets. I wanted to save the thors as i only have 19 left out of 82

The sabertooths and Thors shoot the same POI so thats a great thing.

My first 3 shots with the Thors at 100 yards ( 110gr RS/ W209 Primer) I allowed a 4 minute cool down and shot a Quarter size hole. Shots #2 and #3 are basically in the same hole, but as you can see from shot #1 the difference in the size of the hole.

Im impressed! When my brother in law and i go for his new mexico deer/elk hunt we will be sighting in with the 250gr Ballistic Tip Thor. He has a deer hunt in Sept - 4 days after my hunt ends in colorado ( Be nice and tired for his hunt) . He also has a cow elk hunt in mid/late December.

Im all finished shooting the Accura until hunting season is here! My open sights were adjusted in a way so i could mount the scope without removing them and having to resight in.






Now the 2 shots in the black were my final 2 shots, i didnt give the allow any time to cool down. Just shot and reloaded as fast as possible. Also note the taped up hole above the 3 shot group. That is were the 250gr Sabertooth conicals impact with 90gr RS.



I used teflon tape on the breech plug so i will see how that comes out compared to when i use Lubriplate motor assy. Grease.

W209 primers as always were super clean.