Originally Posted by
DannyD
So BC. using that Dremel trick what we would be looking for is how far the bullet gets pushed back into the case? Then i can use that as my max length?
provided it also fits in the mag and feed properly of course
You got it. Just cut one side of the neck down to the shoulder. If you cut too much in the shoulder, then it won't hold the bullet tight enough.
If after doing a few times the bullet gets loose,just take your thumb and bend the neck in to retighten. Every gun I got, I have a dumby brass for this purpose.
I keep wantign to make a few videos on this and other reloading topics, but I dont' have a decent camera to do it.
I did some tests comparing split case to having a stoney point tool. Its fairly accurate, but you need to factor in about .005" for the jamming in teh rifling.
http://huntingnet.com/forum/reloadin...l-results.html