Originally Posted by BigJ71

I've had the same biscuit (switched housings to a Fuse last year) on my bow for two years now and on my other bow for 3 (same biscuit) and I've noticed very little if any wear to it. Are you shooting the correct size opening? If you are using standard size (not slims) carbon or aluminum arrows you should be using an XL biscuit.

When I first started using the W/B I used a large because that's what I thought the package read but I realized that the large was not big enough and was causing the all to familiar "vane wave" that some folks experienced. Instead of switching vanes to stronger ones I figured out the clearance around the arrow was too tight and switched to the XL biscuit...nary a problem ever since, even with cheap run of the mill vanes on my arrows.

When you change your biscuit remember it's always better to error on the larger size than too small. It'll save you headaches down the road, even tuning was easier when I switched to the XL from the large.

Good luck