Torque depends alot on your release aid and the way you hold it, but honestly I don't believe you will see a very noticable difference. I tie very short loops. I add serving on the inside to prevent the loop from pincing. I like to tie the serving on bottom, not the top. This helps not to have a longer than needed loop and still prevents the loop from pinching. It can be done on top, bottom, or both, (all in personal preference.) The reason I hate long loops is it extends your length of draw. (NOTICE I didn't say draw length.) If your draw length is 28" and your have a 3/4" loop then you have changed your anchor point dramatically.
Last edited by cwillard; 07-12-2009 at 08:01 PM.