I think you may have read what I posted at the beginning wrong. The weapon will shoot just fine without swabbing between shots. Actually, it's damn accurate. I choose not to because when I hunt I'm not hunting with burnt BH209 residue in the bore. I step off to hunt with a pretty much clean bore with one fouling primer fired. That is the bore condition I am trying to simulate by doing all the cleaning in between each shot. Working up my hunting load. If I'm out shooting just for fun, I don't swab at all. What I was saying about the shot being off a little is that when I fire the first shot of the day the bullet goes in one spot. Then if I fire the second shot without swabbing, the BH209 fouling in the bore tends to send the shot a little bit away from where the first shot went. All subsequent shots will pretty much be right on top of the second shot. It's just the difference between the first shot being fired through a relatively clean bore and the second shot fired through a mildly fouled bore. Pretty much everyone I've seen who posted a range report says the same thing about the first shot being somewhat of a flyer.