ORIGINAL: Semisane
ORIGINAL: LaneNebraska
Sorry ta hear about the broke pin
But your plug will need about a 1/8 inch flame channel, with at Least a .035 -.040 exit flash hole--that would be between about a #64-60 Numbered drill bit for the flash hole.
Let us know how it goes after the repair
The flash hole on the Mustang plug is .035, but the flame channel is closer to 3/8" long. It looks like that may be a problem. The face of the plug is flat. I may have to dish it out to shorten the channel.
Does anyone see a problem with doing that?
Semi
I was referring to the
1/8 diameter of the flame channel not the length. Sorry for the confusion