Breechplug
I have comming the MX BC and the Montana X Gun Oil, do I need to follow up with the MX gun oil in the barrel after the MX BC, or is the MX BC all that is needed
It is my understanding.... the Gun oil is to be used on the trigger groups, actions, and moving parts.
It is also my understanding and the way I am approaching it at this point the Bore conditiner is a stand alone product in the bore. It is also my understanding that if you feel that you need more protection adding the thicker oil on top of the thin BC oil will work just fine, but before shooting dry swab the bore, which I do anyway and it is suppose tho be the norm for the use of the conditioner. It was explained to me that the BC will go places in the bore that the oil can not reach.
THE KEY.... The bore should be really clean and dry. If it is not clean the BC over time will leach out the contamiates out. Again I think that is why MX recommends at least multiple treatments before you are feeling the totally effects of the BC.
With all of that said.... When I BC in a gun that I am going to use in the near future I run a moist patch several strokes both sides.... When I treat a gun that is going to be stored for months - I will run a damp to wet patch in the bore several strokes both sides...
And remember this is all new to me also - so what I do may not be what you might want to do...