ORIGINAL: TNHagies
I use brasso and have been impressed so far. Then again, I haven't used anything else so I have nothing to compare it to. I will take note and see if there are any swril marks... I don't recall any though....
put a light on your brass and tilt your gun a little, those swirls will stick out.
i had some deep swirls too.
you could feel them with your finger nail just a little.
i took table grinder with the new 6 inch buffing wheel,make sure you get big wheel for your grinder, like if your grinder is 8 inch try to get one as close to that, some of pads are 4 inch and you will be too deep and its hard to get brass into corners of grinder inside.
that buffing took out those DEEP scratchs, I WAS HAPPY AS H.
www.mibro.com its under product information, scroll to tools,then box on right will appear showing at bottom,cleaning and polishing has good info too like using talcum powder to remove the MIBRO.
my no. is #6 and is green color inside.