i am anal on getting my brass as shiny as i can.

i tried a lot of things to get those SWIRLS out of my brass.

i found out BRASSO was causing a lot of those swirls.

i found something that really works to get them out .

i use MIBRO HIGH GLOSS POLISHING COMPOUND.

i got it at LOWES in the sanding disk dept with tools.

it has RED CAP.

they have4 kinds, from high gloss up to coarse,stay with high gloss.

i bought a buffing 6 inch wheel and put it on my grinder.

took parts off and buffed them with the high gloss on wheel pad.i used the FIRM PAD.

came out great.took all swirls out.

after that your brass always gets tarnished again after awhile.

DONT USE BRASSO ON IT, IT WILL PUT SWIRLS RIGHT BACK IN IT AGAIN.

take a soft rag and wipe some MIBRO on it and lightly rub your brass,it will shine like new or better.

this stuff will last you a lifetime, its in a solid tube and not expensive,i think around 4 dollars.

i also use it inside my bore with a tight patchand in all my centerfield rifle bores to shine them up .

stay away from BRASSO, it will put swirls in brass.


www.mibro.com