I ground down the ejector to a small point, so that it looed like a half circle, and got rid of the flat surface that comes into contact with the spent case. It' s kind of hard to explain but if you take out the ejector and place a dime on it so that there now is a point at the top you should be able to see what I am talking about.


I also took out the extractor and filed it down with a small fine file so that the " point" of the extractor was centered instead of being on the bottom. It ejects the cases straight out now instead of into the top of the receiver.

The gun is really easy to take apart. It' s only heald together with pins.