HuntingNet.com Forums - View Single Post - Un-welcome noise!!
Thread: Un-welcome noise!!
View Single Post
Old 11-16-2008 | 12:22 PM
  #4  
early in's Avatar
early in
Giant Nontypical
 
Joined: Sep 2005
Posts: 7,368
Likes: 0
From: Mont County, Pa
Default RE: Un-welcome noise!!
ORIGINAL: razor6570

I agree get it to a pro shop. They will tear the top cam off and check the bearings. They have scentless oil that they will put on it if they cannot find anything wrong. Also check the screws in the cam and make sure one hasn't backed off and is rubbing something. Good luck in Alberta!
Thank yourazor, but there aren't any screws. The cam is on a shaft with spacersand clips on the ends.
early in is offline  
Reply
0