Unlike the other two.. my Wolverine is very fowl sensative. Almost two inch difference between the clean barrel and the fowled barrel.It shoots high and left for some reason almost90% of the time. I have hunted with it like this knowing that the first shot will be a little off. But then all my shooting is very close. So if I aim dead center on the kill zone, I will be in business.

When I do fowl, I take 40 grains of the powder I will be hunting with, in my case Goex 3f, dump that down the barrel, then push a bore button on top of all that. I then cap it and fire it off.

After that I swab the bore just like I am reloading and then pop a #11 cap through it. When I now load, all shots go to the same place. My load is easy.. 80 grains of Goex 3f and a .44 caliber 300 grain XTP in a Green Harvester Crushed Rib Sabot. This is a very accurate load.