I recently installed and tuned a trophy taker shakey hunter on my 2002 mighty-mite.
With the shaky hunter shooting bullets at 6 feet and tearing the crap out of fletchings at 20 yards with tight groups, I have a sight problem. I was able to tune the bow with the center shot cutting the burger holes to where I can see the lower quarter of the holes under the arrow, hence somewhat maxamizing the centershot and power stroke of the bow.
But now my Toxonics Sniper sight won' t work. I need more play on the gang adjustment to set the 20 yard pendulumn pin. About .25" would do it. The same .25" bowtec moved the darn sight holes above the burger holes when compared to my other two bows (.25" further away from each other than my mathews and reflex). I talked with my dealer and then to bow tec and they suggested I needed a " sight drop down bracket" So they sent one to my dealer who sent it to me. Well, I get it in and the damn thing won' t work on this bow. When I try to install it it hit' s the cable guard mount on the side of the riser. So now I have to trade in my site for one with a 2.5" verticle adjustment (like my savage pendulum has)
Does the aggrevation ever end??
Any suggestions?
Is my nock point too high, yet I' m still able to get perfect bullets?