ORIGINAL: Hammer49
Hey guys I need a little help here. I am up-to-speed with cleaning the barrel and breech plug (encore) but have never "broken" the gun down. How should I go about doing this? After taking the barrel off, should I also remove the trigger mechanism? If so, how do I accomplish this? Thanks in advance for any and all advice!
Hammer
Do NOT take the "trigger mechanism" apart unless you know what you are doing. It doesn't come out as a single unit. If you push those pins out you will have several parts lying on your work bench and you will need guidance or experience to put it back together.
Underclocked has a good method. I do a similar cleaning but do not use water. Try that.