ORIGINAL: FG
After reading the other post about the firing pin sticking on a .45 optima i went and got mine and sprayed some carb cleaner into the hole and let it dry, squirted some moly lube into there and then proceeded to spray down the hammer area and inside the guts.
Damn if i didnt end up with a smooth crisp 2 1/2lb trigger.
I lessened the trigger pull on my CVA Wolf buy cleaning the firing pin area real good. And while I had the barrel off I pulled back the hammer, when the firing pin was fully recessed I squirted itand around the trigger with a heavy stream of Rem Oil with Teflon. Worked the hammer and trigger back a forth. Worked great.