ORIGINAL: Matt / PA
I do know you are pressing the bow incorrectly regardless of the press..........
Those lower pins against the limbs need to be down at the limb pockets.
You don't want to be levering all that force around the belly of the limb a couple inches up. [&o]
MGH,
Of course Matt is right. Right now your putting an extreme amount of pressure on your limbs. That pin in the press needs to sit on the limb AT the limb pocket. You could very easily damage your limbs.
(Not pointing at you MGH but I wonder how many people blow their limbs this way and then post them up blaming Bowtech)
I hope you not pressing this bow that hard in this way. PLEASE get the limbs in a correct position. When done, this may alleviate any issue you might have in not pressing it enough.
The pins at your cams could be moved up too. I'm sure you'll get enough press it the limbs at that point. Place the pins near the cams but still allowing room to work on the cam.