HuntingNet.com Forums - View Single Post - Question on improving my factory rifle
View Single Post
Old 06-27-2008 | 08:42 PM
  #31  
adirondack46r
Spike
 
Joined: Apr 2008
Posts: 84
Likes: 0
From: Rochester NY
Default RE: Question on improving my factory rifle

Quick follow up... Thanks for all the advice. I did 2 things: trigger work, and shot several hundred rounds of Remington, Federal, Winchester and some handloads from a friend. My best groups have been less than 1". The worst groups are 1.25 - 1.5". I had a couple of fluke groups under 1/2" and I had an occassional flier that was out of my group by 2-3", but for the most part things stayed consistently between 1 and 1.5".

The one other thing that may have helped was that I went from sandbags to a bench rest. My plan is to have the barrel floated, have the recoil pad replaced and take a look at some basic handloading equipment.

By the way, remington ammo still shot poorly out of this rifle. Federal premium was the most consistent overall, and one handload that my friend put together gave me a couple of groups small enough that I had a couple of holes touching.

Thanks for your advice. I'm on my way.
adirondack46r is offline  
Reply