Here is what I have seen after tuning some of these rests. I like to serve the cord from the QAD to the downward cable. The lower you position the cable on the downward cable the faster the rest will flip out of the way (1 or 2 inches can make a big difference). Where you attach the cord to the downward cable is very important.The rest needs to be flipped up all the way with no slack at full draw, and it can't be to taunt either, this is the hardest thing to get exactly right.Also, most people will use the TL1 launcher which is longer and allows more clearance. However the TL1 launcher will most likely cause a clearance problem if you shoot cock feather up (You may have to remove the top bar and loose the full containment unless you use feathers). Once you get it right it really tunes great. QAD has great customer support so call them if you need advice.