ORIGINAL: brotherbdc
I called bowtech, received absolutly no help from them, cept the tech said that slight cam lean is normal.....ok? He blamed the serving wear on my serving job or the post setting was wrong,.....anyway seeing as how the problem dident start till I swapped modules from 29" to 29.5 I went back to the 29" modules and have shot several times since with no problems!!!! 29" is still comfotable for me to shoot and I only lost about 3 or 4 fps.
What ticks me off is the local dealers, (cept one who realy isent local) had no clue what the post settingsshould have been,The tech @ bowtech was a either a dummy or was having a bad day! I never had problems dealing with Bowtech/Diamond techs in the past, and probably wont in the future but he pi$$ed me off.
So in conclusion, I have found that the 29.5" modules for a 101st do not do well on MY bow, dont know why but who cares Im back in buisness. I just hope I never have to deal with that same guy @ bowtech...anyway good luck with yours MGH.
Thanks. The Tech I spoke with was originally thinking it was my post setting, until I told him what I had it set on, and that I had changed it around to no avail. I mentioned the possible limb twist, and he agreed that was probably the issue. However, I have 29.5" modules and 30" modules here that I'm going to swap in just for kicks to see if that changes anything seeing how it did change for you. Thanks for the idea.