RE: Sighting in G5 Optix sight - Please help
I have a Katera XLat 70lbs, 30.5" draw and the sight I bought has the small sight ring and I have pins set at 25, 35, 45, 55, 65 yds without a problem(you can either buy one with a small sight ring 2" or the 2 3/8" ring)...The sight moves up and down by turning a allen head screw for each. You don't have to lock it down just turn it and forget. The pins go up in down in a somewhat different way. You have 2 allen heads for each pin. IE if you want to move the pin down you loosen the bottom screw and tighten the top then tighten the bottom. It probably sounds hard but it's really easy. You can also move the pins right and left which for the most part I don't touch.