SuperKirby

I was a bit afraid this discussion might lead down the wrong course a bit. Kirby all I can tell you is what I do. I do not think you need to lube the barrel each shot with with an oiled patch.

Most often the damp patch that you patch with between shots will provide all the residual lubricant you need in the bore while at the range. I use regular windex for a patch solution it is 99.9% soap of some sort with a bit ammonia mixed in. The soap and the ammonia act as a stripper - stripping fouling form the bore, the ammonia aids in drying because of it rapid evaporation characteristics.... but even then there is a residual amount of dry soap left in the bore that does and will act as a lubricant, all the lubricant that is necessary for sabot... But at the range i do help it along a bit as I spin the outside of the sabot on my tongue to add just a bit of saliva moisture to it. All of this acts as a lubricant, enough lubricant at the range anyway. I do patch the barrel with a very light coat of gun oil while hunting to protect the bore - but not needed at the range.

I should also suggest to you I shoot T7 andI am one of those guys that rarely strip cleans a gun during the season and I am not suggesting you do that either until you are totally comfortable with how it works... I do however patch the barrel with a windex patch every time I shoot during the hunting season - this patch(s) will neutralize the ill-effects of the T7 and then I will apply a very very light coat of bore oil to protect the bore from rust while hunting. That light coat of oil remains in the bore until I repeat the process... so in effect I shoot a semi fouled barrel all the time.

I hope this makes some sense... it does to me but I am afraid unless you see what I am talking about - it is kinda like "what does he say here???"