Hello
FIRST OFF, I'M A BEGINNER AT THIS RELOADING. So confirm this for yourself. I have a little book on the 44 mag. that is basically a composite of different manuals. I have 180 grain bullets, Semi-JHP Remington from Midway USA. Since the manual doesn't cover that bullet, I find one comparible (by weight, bullet dia.) and look at the recipe it calls for. I found one that uses 6.9 grains of Unique for 1200 fps (Hornandy HP-XTP) and loaded a bunch of these up. I used CC1 Magnum Large Pistol primers. These shot great with little recoil and I plan on using these for plinking. I just loaded some up using the same primers, just not the magnum, but haven't shot them yet. However, I shoot iron sights and I'm still practicing a lot to become good at shooting a revolver, so this load may not be an accurate load because I'm not at a level to determine any of this.
Again. let me point out the fact that I'm new at this and what I've done may be totally wrong, (Im sure somebody will point this out if I am, which is good).
Good Luck
Dan