I' ve got the TT shakey hunter on my 2002 SC Patriot - 70#, 27" draw.

For hunting I shot 4 VANE 4" with a LH - and was getting contact - I rotated the nock & was able to get clearance by having a vane not straight down at 6:00 but more like 5:00 - just so it would clear that pc of steel that holds the string that attaches to the cable.

I used spray foot powder to determine the location of the contact & by re-orienting the vane I could acheive proper clearance.

For 3D I use the same setup but with little vanes (1.75" or less) and they are shorter (from center of shaft OUT I mean - not length) so I have NO clearance problems with ANY orientation.

I like the TT - it works better (for me) than my MZE did!