Well, I've now reached the 750 shot mark with my Darton impact and feel that I can share some of my impressions for any others who might be interested in a Darton xbow.

First of all, the feature that stands out most positively for me is the string serving wear. After 750 shots the serving show no real signs of wear. The serving is flatten slightly and a bit duller in appearance where the fingers that hold the sting make contact but there is no fuzziness or fraying of any kind. I did call Darton and they told me to wax the serving which is something I probably wouldn't have done otherwise. I don't know if this makes that big a difference but it doesn't seem to hurt.

Next in line is the accuracy. It it very accurate. I shot 43 arrow 2 days ago before I was snowed out and when my Dad saw my target, because the arrows kept hitting the same holes, he said it looked like I had only fire 11 shots. Due to strong winds and bad weather I've only been able to shoot 40-50 yards one day while sighting in my Lumi-zone and was able to chew the center out of a 3 inch Shoot and See target dot. So I'm very happy with the accuracy and have a lot of confidence this xbow.

The xbow is also equipped with limbsavers and string leeches. Surprisingly, the string leeches are still there. I haven't had much luck with these on my 300 fps Hoyt Viper compound so it is a pleasant surprise, even though I don't know how much effect they have on string noise. Overall noise on the bow seeem about the same as the Excalibur Exomax I had but is more of a thump sound while the Emax was a higher pitch pop. Neither of these xbows could be considered quiet.

For those interested I have shot 22" 490 grain 2219s @ 340fps and I am now shooting 22" 465 grain Carbon Express Maxima @ 348fps. I did find that at 348 the xbow will shoot flatter than the Lumi-zone scope will adjust for even though the scope is marked to 350fps. It shoots consistently 1.5 inches high using the 30, 40, 50 yd dots in the scope. Not a big deal but thought I should mention it.

The trigger has a slight take-up but breaks clean at 4.3 pounds according to my Lyman digital trigger pull gauge. This isn't terrible but it's not great either. It is the one feature of the bow that took me the longest to get use too and it does require concentration on proper shooting form.

Due to the trigger and stock design, the saftey is also located forward on the barrel which can be awkward. I've had two people reach over the top and through the string to take the saftey off. So if you have one of thes xbows, you have to make sure you pay particular attention to safe handling procedures.

Finally, this xbow is not light. I just mounted a Lumi-zone scope on it (which requires high mounts to keep the scope off the scope rail) and the overall weight is just under 10 lbs. While I find the weight helpful in steadying the xbow during off-hand shooting, I'm sure there are many who would not want to pack this kind of weight around all day.

All in all I am very happy with this xbow. Excellent speed combined with outstanding accuracy make this the perfect combination for hunting the big, open public land of the West, where a 50yd shot is far more common than a 30yd shot.

This xbow was a gift from my family and while I wanted a fast xbow to replace my Exomax, I don't know if I would have bought this xbow for myself. Now that I've had time to shoot it and put it through it's paces, I've come to the conclusion that they made a great choice. Despite it's saftey location and slightly stiff trigger, I would recommend Darton xbows to anyone looking fo a well made, powerful xbow. In fact, I think if Darton advertised more and maybe offered another model with a more conventional stock you would see a lot more of them in the hunting woods.