Ok, the cams are in time and it didnt change anything except the back wall seems a little more solid than before and my impact point is slightly higher indicating I picked up some speed. But the main problem of the rest being way to the left is still there.

Here are some things I notice when I look at the bow. When you look at the bow from behind, the string does not line up through the middle of the limbs/riser, it lines up exactly with the left side of the riser. See pic below I know it' s hard to see but I' m square back behind the bow doesnt run through the middle it' s off to the side



I read in the Bowtech manual that the top cam is supposed to lean a little " to the cable rod side" . Here' s a pic of the top cam, what I notice is that the string doesnt feed into the cam straight on and the cam is displaced significanly to the left by a bushing (the bottom cam is exactly the same). Heres the pic


pdq 5oh, does your DC Pat look like this?

forgot to add: I' m shooting Easton Carboneros 400' s cut at 27.5 inches w/100 grn tips.

thanks