Cargo, I have a NAP 4000 on my Dually. Your launcher is way too far left. Start out at 3/4" for center shot. Measure from the center of the arrow (when raised) to the riser. Set the rest to raise the arrow even with the rest mounting hole. On the Pat you should be able to set the rest level, or very slightly below level. Draw the bow & have someone mark where the slide is, at full draw. Adjust the lifting cable to raise the launcher completely while not binding the cables. You can do this by pulling the slide back by hand to the mark. This also allows the launcher to drop quickly enough to give clearance. Set nock point 3/16" high to start. This should get you in the ballpark to start tuning. I' ve had great luck with the 4000 rests, and very minor adjustments were needed, from the starting point. Also, should the lifting cable be in the way, you can twist it clockwise (looking from the back) to gain clearance. Hope this helps.

I forgot to mention I don' t use the rubber thing on the shelf. I cover it with mole skin.