HuntingNet.com Forums - View Single Post - Looking for some advise on peeps and powder tools
Old 03-25-2008 | 04:38 AM
  #2  
gleason.chapman
Nontypical Buck
 
Joined: Dec 2005
Posts: 3,246
Likes: 0
From:
Default RE: Looking for some advise on peeps and powder tools

ORIGINAL: johnnydialtone

After muzzleloader hunting for 3 years and reading tons of info on this site I have figured out3 things:

1. Need to get a peep sight on my Omega instead of the open sights. (Scopes are illegal here).

2. Need to ditch the APP sticks and switch toloose powder.

3. Need to actually try the XTP 300s that came with my Omega instead of only shooting the Powerbelts I found on sale for 50 cents a piece.

As far as #1 goes I hear that the Williams WGRS may be OK if I get a new front sight that is lower than the stock front sight. Thompson makes one as well.If you have any opinions on the peep sight for an Omega please let me know. Havent heard much about the Thompson peep.

As far as #2 goes I need some advice on a powder measurer and what you use while hunting as far as speed loaders goes. I have been using red speed loaders with 2 sticks and a bullet in the speed loaders. Not sure they will work for loose powder.Are there different speed loaders or something else you use when using loose powder and sabot / conicals? What powder measurer should I get for a reasonable price.

As far as #3 goes I just need to shoot and see how those bullets work.

If anyone has recommendations on peeps, powder measuring tools I need, and speed loaders for loose powder please let me know.

Thanks in advance.
1) for peeps I gave you one on previous thread.

2) for measuring tool, I like this U-View powder measure: http://tinyurl.com/35srxg and the flask is also nice, I have one of both of these.

3. I have some green Knight brand speed loaders that hold a .452bullet with sabot very tight, they are tapered slightly. They work very good for loose powder, when hunting. I also use these and keep the bullets separate from the powder in a separate clear speed loader, since I find the 3f gets between the sabot and bullet and I loose a little powderin the seating of the bullet.

4. As for PBs, shoot a stronger bullet (Gold Dot, Nosler, SW, Barnes almost anything)or ask Mr. Pee, I meanProfessor PB,how to shoot them---like 80g 777 absolute max.
Chap Gleason









gleason.chapman is offline  
Reply