HuntingNet.com Forums - View Single Post - ? for you bowtech pros
View Single Post
Old 02-28-2008, 05:33 PM
  #10  
davepjr71
Nontypical Buck
 
davepjr71's Avatar
 
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
Default RE: ? for you bowtech pros

You could try French tuning. By the way, on my '07 Ally I have my arrow centered on the top of the berger hole.

I prefer French because it seems to take the least amount of time, is simple and straight forward, lets you practice and a distanceand to me has proven to work.

Stand about 4 yds away from the target and sight in your bottom pin (50 yd)to hit dead center.

Go back to 50 yds and use the bottom pin shooting 3 arrows. If you hit left move the rest a hair right. If you shoot low move the rest a hair up. Reverse for right hits and high hits.

Go back to 4 yds and see if you are still dead on. If not, adjust your sight to correct this and then go back to 50 yds and shoot again and adjust accordingly.
davepjr71 is offline