RE: For Roscoe - Tiller
The one bow I owned thatthis tiller tuning method had the most beneficial effect for was a McPherson SoloLite, single cam.It was paper tuned at the shop before I picked it up. To get the bow to shoot bullet holes, the nock wound up a full inch below square. It was horribly out of tiller even though they had done thestandard "tighten the limb bolts down all the way and then back off to the desired draw weight" routine.
I took the bow home, tore the whole thing down and started over from scratch. Put everything back together.Set the tiller properly had the thing shooting those bullet holes again within 5 minutes with the nock properly set at 90 degrees.
It is every bit as beneficial for single cams as it is for duals and hybrids.